Mina Timeless Set: Pick the Cutter Length
By JapanShears EditorialUpdated
On this page
The Mina Timeless set gives you one convex-edge cutter and one fixed 6.0-inch, 30-tooth thinner. Both tools are right-handed, with offset handles, SUS440C steel and a matte black finish. You choose the cutter length; the thinner is unchanged.
Read the three pair options
| Selected option | Cutter | Thinner |
|---|---|---|
| 5.5-inch pair | 5.5-inch convex cutter | 6.0-inch, 30-tooth thinner |
| 6.0-inch pair | 6.0-inch convex cutter | 6.0-inch, 30-tooth thinner |
| 6.5-inch pair | 6.5-inch convex cutter | 6.0-inch, 30-tooth thinner |
Keep the cutter choice tied to a length you use for a particular job. If you are replacing a familiar tool, compare its nominal size and position in your hand. The reach guide explains why the inch label does not give the pivot-to-tip cutting span.
All three Timeless cutter options keep the stated convex edge. You are choosing a different nominal length here, rather than the edge change found in some other configurable sets.
Is the thinner part of the purchase you need?
The thinner has a toothed blade for a separate weight or texture task. Its 30 teeth identify this tool’s construction; the number does not predict a removal percentage from your section. The cut-ratio guide explains why the complete model and method matter.
Choose the pair when both jobs belong in your kit. If your existing thinner already suits the work, a matched finish alone need not justify replacing it.
Choosing between 5.5, 6.0 and 6.5 inches
The three options differ only in cutter length. Start from the cutter you use most and decide whether to keep its length or move half an inch.
| If your work is mostly | Consider | Reason |
|---|---|---|
| Detail, fringes and short layers | 5.5 inches | Tips are easier to place close to the face |
| Mixed salon cutting | 6.0 inches | A middle reach for most sections |
| Longer layers and wide sections | 6.5 inches | More blade across each close |
A longer cutter is not a better cutter. It covers a different job. If you work across all three, keep the length you already know and let the thinner cover the blending.
What a matte black finish asks of you
A dark matte surface shows hair, product and fingerprints differently from a polished blade. Clean it the same way as any other shear: remove hair after each client, wipe both blades with a soft cloth and dry them fully, including around the pivot.
Avoid abrasive pads and harsh cleaners on the finish. They can change its appearance. Store the cutter and thinner closed, in separate slots, so the blades and teeth do not knock against each other.
The finish describes the surface. It does not change the steel stated for the tool, and it gives no information about edge life. Follow the working care routine for both tools.
Using the pair as a first kit
For a first kit, the pair supplies the two tools most educators list: a cutter and a toothed tool. Check your course requirements before ordering. If they name a cutter length, select the matching option. If they name a thinner with a different tooth design, the fixed 30-tooth thinner may not match the brief, and a single cutter is the cleaner purchase.
Both tools are right-handed. A left-handed stylist needs a left-handed build from another family; the left-hand shortlist is the place to start.
Replace one component through the singles
The six-inch Timeless cutter is listed separately, with the same three cutter lengths available. The Timeless thinner is the separate fixed six-inch option. Use their product selectors for current prices rather than assuming the set is always the cheaper route.
The similar-name guide helps you keep family, edge and included tools together when several dark pairs look close.