Skip to content

Japanese hair shears for considered cutting choices

Yasaka

Compare Yasaka model constructions and exact kit components, including a single seven-inch Barber cutter and two- or three-piece barber sets.

Yasaka — Yasaka Hairdressing Scissors 3PC Master Set
More about Yasaka

Yasaka’s Traditional cutter keeps the finger and thumb rings in line. The SL has a slim offset handle that lowers the thumb ring. Compare them at the same nominal 5.5 or 6.0 inches to see the handle choice clearly, rather than changing grip and size together.

For a toothed tool, the YS listing offers 16, 20, 30 and 40 teeth at the same nominal 6.0-inch size. Tooth count identifies the variant, but tooth geometry and technique decide how it belongs in your work. More teeth is not a reliable shorthand for less removal.

The separate YS-30S, 30T and 30W models all have 30 teeth at nominal six inches, with right-handed opposing handles and ATS314 cobalt stainless steel. Their maker cut-rate ranges differ by suffix. Keep the exact design in the choice rather than treating 30 teeth as a complete specification. This is a different listing and handle from the offset YS family with 16, 20, 30 or 40 teeth.

The wider Yasaka range includes other cutters and set combinations. Keep the exact model, selected hand, whole-shear size and component details together when comparing them. ATS314 and SUS440C are material descriptions, not a substitute for that model choice.

The single Barber cutter is right-handed and fixed at nominal 7.0 inches, with a semi-offset handle and clam-shaped convex edge. Its two-piece set pairs a seven-inch cutter with a fixed six-inch thinner in 16, 20, 30 or 40 teeth. The three-piece master set adds a second cutter at 4.5, 5.0, 5.5, 6.0 or 7.0 inches, creating twenty complete combinations. Another seven-inch cutter can answer a backup brief; a different nominal length can cover another reach. Keep the actual component roles and tooth choice together.

Read the Yasaka maker profile →

Filter

Type
Length
Hand
Handle
Price

Products

23 products

The journal

Guides for this choice

Frequently asked

Traditional or SL: what should I compare first?

Start with the ring layout. Traditional has in-line rings; SL uses a slim offset handle. Compare at the same nominal size to keep the handle difference clear.

Are the YS tooth options interchangeable?

They are separate tooth layouts under one listing. Select the exact count and compare its construction; do not assume that more teeth always means a lighter cut.

Is a YS-30S, 30T or 30W another name for the offset YS 30-tooth option?

They are separate models in an opposing-handle listing. Each has 30 teeth, while Yasaka gives 30S, 30W and 30T their own cut-rate ranges. Keep the exact suffix and listing together.

Does every Yasaka three-piece barber set add a shorter cutter?

The second cutter can be 4.5, 5.0, 5.5, 6.0 or 7.0 inches beside the fixed seven-inch cutter. The 7.0/7.0 option keeps their nominal lengths the same. Every combination also has a six-inch thinner with the selected teeth.