Mina Sakura II Professional Scissors Set
$199.95
Was $274.95
Save $75
Mina Sakura II right-handed set: convex cutter in 5.0–7.0 inches plus a fixed 6.0-inch, 30-tooth thinner. Offset handles and Sakura engraving.
At a glance: 5.0–7.0″ · Right-handed · Offset handle · SUS440C steel
The requested option does not match this product. Choose an option below before adding it to your cart.
Your set: 5.0" Cutting & 6.0" Thinning Set
Includes 6.0″ thinner
Added to cart!
My fit
Record your cutting hand, shear length and main technique. Shears that match are listed first.
Saved on this phone only. Nothing is sent and no account is created.
| Steel | Premium SUS440C Shear Steel |
|---|---|
| Handle | Offset |
| Sizes | 5.0″ to 7.0″ |
| Hand | Right |
Thinner facts
Tooth count is not cut rate. A shared tooth count does not mean a shared cut rate; two thinning shears with the same count may remove very different amounts. Test on a hidden section first.
- Free standard shipping on orders over A$89. Shipping details
- Delivery within Australia. Payments by PayPal. Payment options
- 14-day change-of-mind returns on unused shears. Returns policy
- Warranty terms vary by model. Warranty & faults
Care
Keep the edge free of hair and moisture, and store the pair so the blades cannot knock against other tools.
- Maker
- Mina Scissors
- Hand
- Right
- Lengths
- 5.0″, 5.5″, 6.0″, 6.5″, 7.0″
- Nominal whole-tool length
- 5.0 inches
- Handle Offset handleAn offset handle staggers the rings so the thumb ring sits closer to the pivot than the finger ring, and semi-offset describes a smaller stagger.Read more in the glossary
- Offset
- Steel
- SUS440C
- SKU
- MIN-SAK-S50
What's in this set
For the option you picked: 5.0" Cutting & 6.0" Thinning Set
Set SKU: MIN-SAK-S50
Cutter
- Nominal whole-tool length
- 5.0 inches
- Cutting hand
- Right
- Handle
- Offset
- Edge
- Convex
- Steel
- SUS440C
- Teeth
- Not applicable
Thinner
- Nominal whole-tool length
- 6.0 inches
- Cutting hand
- Right
- Handle
- Offset
- Steel
- SUS440C
- Teeth
- 30
These are the shears in the set. Description lists other construction details and accessories. The set SKU covers the whole set; it is not the SKU of one tool.
Keep a separate record for each actual shear. Our tool and service log guide shows what to note.
Specs shown are for the option you picked. Our listing walkthrough shows what can change between options and how to check each tool in a set.
Choose the cutter; the thinner stays the same
This Sakura II set pairs a convex-edge cutting shear with a 6.0-inch, 30-tooth thinner. Both are right-handed, with offset handles, SUS440C steel and Sakura engraving. The cutter establishes the line; the toothed shear lets you adjust weight and soften transitions.
The menu changes the cutting shear’s length. It does not resize the thinner.
| Selected cutter | Thinner in the pair |
|---|---|
| 5.0 inches | 6.0 inches, 30 teeth |
| 5.5 inches | 6.0 inches, 30 teeth |
| 6.0 inches | 6.0 inches, 30 teeth |
| 6.5 inches | 6.0 inches, 30 teeth |
| 7.0 inches | 6.0 inches, 30 teeth |
When a pair makes sense
Choose a set when you need both jobs covered and these two tools fit your work. If you already have a cutter you like, compare a single thinner before buying another pair. A bundle is useful when you will use its components, not simply because it contains more pieces.
Pick the cutter length against a familiar shear. The shorter options keep the tip closer to your hand; the longer ones give more reach across a section or comb. Our size guide explains the nominal whole-tool measurement.
The buyer’s guide uses Sakura II to show why every tool in a set needs its own specification. Browse sets and kits to compare other pairings.
Keep a record for each tool
Give the Sakura II cutter and thinner separate protected slots so their blades cannot knock together. Clear the thinner’s 30 teeth gently and protect the cutter’s convex edge. The cutter length varies with your selected set; the thinner remains 6.0 inches, so record them individually rather than applying the set’s size to both tools.
Our working care routine covers the blade, teeth and pivot as separate parts. The tool log helps you keep each shear’s observations and service history distinct.
Shipping
Standard shipping is A$6, and free on orders over A$89, so any order with a pair of scissors ships free. Express is A$9.95. Online checkout delivers within Australia.
View full shipping policy →Returns
Change of mind: contact us within 14 days of delivery. The item must be unused, undamaged and complete in its original packaging. You pay return postage, the original delivery charge is not refunded, and a 10% restocking fee applies. Used items and opened razor blades are excluded. Faults are covered by the Australian Consumer Law.
View full returns policy →More Mina shear sets
All Mina →- −33% off
- −18% off
- −20% off
The journal
Understand the fit, look after the tool
Guides to help you compare the selected model and plan its care.
Compare
Build an exact shortlist
Compare selected options by tool, hand, length and construction.
Size
Measure the whole tool
Separate the nominal size from the cutting blade length.
Find
Compare an exact option
Keep hand, tool, length and maximum price fixed.
Care
Look after this construction
Follow the selected model’s instructions for its blade, teeth and pivot.
