Skip to content

Japanese hair shears for considered cutting choices

Joewell Hair Cutting & Thinning Scissors Set

Joewell Classic Hair Cutting & Thinning Scissor Set

$999.00

One right-handed Classic cutter in 4.5–7.0 inches with a separate 5.6-inch E-30 or E-40 thinner. Twelve cutter-and-tooth combinations.

At a glance: 5.0–7.0″ · Right-handed · Traditional opposing rings handle · Classic cutter: Standard JOEWELL Blade (flat single bevel); E-series thinner: Standard JOEWELL Blade edge · Supreme Stainless Alloy steel

Cutter length
Teeth

Size help

Added to cart!

Specifications
HandleClassic
Sizes4.5″ to 7.0″
Teeth30, 40

Thinner facts

Teeth
30, 40

Tooth count is not cut rate. A shared tooth count does not mean a shared cut rate; two thinning shears with the same count may remove very different amounts. Test on a hidden section first.

Similar, in stock

In the box
  • Two tools: one Classic cutter and one E-series thinner
  • Right-handed; six cutter lengths from 4.5 to 7.0 inches
  • E-30 has 30 teeth; E-40 has 40; both are 5.6 inches
  • Traditional opposing-ring handles; Classic Standard flat single bevel blade
Care

Keep the edge free of hair and moisture, and store the pair so the blades cannot knock against other tools.

Read the care guide

Hand
Right
Lengths
5.0″, 5.5″, 6.0″, 6.5″, 7.0″
Handle
Traditional opposing rings
Edge
Classic cutter: Standard JOEWELL Blade (flat single bevel); E-series thinner: Standard JOEWELL Blade
Steel
Supreme Stainless Alloy
SKU
JOE-CLS-S4530

Specs shown are for the option you picked. Our listing walkthrough shows what can change between options and how to check each tool in a set.

All Cutting Shears →

The journal

Understand the fit, look after the tool

Guides to help you compare the selected model and plan its care.

Size help

Joewell Classic Hair Cutting & Thinning Scissor Set · 5.0″, 5.5″, 6.0″, 6.5″, 7.0″

What do you do most?

From this model’s sizes

Solid outline: suggested for that work. Maker guidance, as a starting point. Control and hand fit decide.

Check the pair you own

  • Overall length is roughly the inch size. Use a real ruler on the pair you own. Tip to ring end: 15.2 cm is 6.0″. Makers differ on whether the finger rest counts.
  • Blade length, pivot to tip, is the reach you cut with. The maker does not publish a blade length for this model.

Happy with what you use now? Stay with that size. Half an inch shorter gives more control at the tip. Longer gives more reach.

Quick fit check

  • Palm: rest the shear flat on your palm. Tip near your middle finger: that length is worth trying.
  • Rings: they should hold without squeezing. Your thumb should slide out freely. Inserts tighten a loose ring.