Skip to content

Japanese hair shears for considered cutting choices

Mina Hair Cutting & Thinning Scissors Set

Mina Umi Master 3 Piece Set

$279.95

Was $384.95

Save $105

Three Umi tools: two selected convex cutters and one six-inch, 30-tooth thinner. Choose one of the 21 Right or six Left listed combinations.

At a glance: 5.0–7.0″ · Right- or left-handed · Offset handle · SUS440C steel

Includes 6.0″ thinner

Hand
First cutter
Second cutter

Size help

Added to cart!

Specifications
SteelHigh-Grade SUS440C Stainless Steel
HandleOffset
Sizes4.5″ to 7.0″
HandRight or left
Weight42 g per piece

Thinner facts

Weight
42 g per piece

Tooth count is not cut rate. A shared tooth count does not mean a shared cut rate; two thinning shears with the same count may remove very different amounts. Test on a hidden section first.

In the box
  • Two convex cutters plus a six-inch, 30-tooth thinner
  • Twenty-one Right and six Left combinations
  • SUS440C, offset handles and mirror-polished finish
Care

Keep the edge free of hair and moisture, and store the pair so the blades cannot knock against other tools.

Read the care guide

Hand
Right & Left
Lengths
5.0″, 5.5″, 6.0″, 6.5″, 7.0″
Handle Offset handleAn offset handle staggers the rings so the thumb ring sits closer to the pivot than the finger ring, and semi-offset describes a smaller stagger.Read more in the glossary
Offset
Steel
SUS440C
SKU
MIN-UMI-M4545

Specs shown are for the option you picked. Our listing walkthrough shows what can change between options and how to check each tool in a set.

All Mina →

The journal

Understand the fit, look after the tool

Guides to help you compare the selected model and plan its care.

Size help

Mina Umi Master 3 Piece Set · 4.5″, 5.0″, 5.5″, 6.0″, 6.5″, 7.0″

What do you do most?

From this model’s sizes

Solid outline: suggested for that work. Maker guidance, as a starting point. Control and hand fit decide.

Check the pair you own

  • Overall length is roughly the inch size. Use a real ruler on the pair you own. Tip to ring end: 15.2 cm is 6.0″. Makers differ on whether the finger rest counts.
  • Blade length, pivot to tip, is the reach you cut with. The maker does not publish a blade length for this model.

Happy with what you use now? Stay with that size. Half an inch shorter gives more control at the tip. Longer gives more reach.

Quick fit check

  • Palm: rest the shear flat on your palm. Tip near your middle finger: that length is worth trying.
  • Rings: they should hold without squeezing. Your thumb should slide out freely. Inserts tighten a loose ring.