Joewell SNT-40 Volume Control Thinning Scissors
$899.00
Was
Right-handed Joewell SNT-40 volume-control thinner, nominal 5.9 inches, with 40 grooved-tip teeth and a dry-bearing system. Maker rate below 5%.
At a glance: 5.9″ · Right-handed · Offset handle · Thinning blade with grooved tooth tips edge · Supreme Stainless Alloy steel
The requested option does not match this product. Check the product details, then confirm this tool before adding it to your cart.
Added to cart!
My fit
Record your cutting hand, shear length and main technique. Shears that match are listed first.
Saved on this phone only. Nothing is sent and no account is created.
| Handle | Classic |
|---|---|
| Sizes | 6.0″ |
Thinner facts
Tooth count is not cut rate. A shared tooth count does not mean a shared cut rate; two thinning shears with the same count may remove very different amounts. Test on a hidden section first.
Similar, in stock
- Free standard shipping on orders over A$89. Shipping details
- Delivery within Australia. Payments by PayPal. Payment options
- 14-day change-of-mind returns on unused shears. Returns policy
- Warranty terms vary by model. Warranty & faults
In the box
- 5.9-inch, right-handed volume-control thinner
- 40 teeth with small grooves at their tips
- Dry-bearing system; maker cut ratio below 5%
Care
Keep the edge free of hair and moisture, and store the pair so the blades cannot knock against other tools.
- Maker
- Joewell Scissors
- Hand
- Right
- Length
- 5.9″
- Nominal whole-tool length
- 5.9 inches
- Handle Offset handleAn offset handle staggers the rings so the thumb ring sits closer to the pivot than the finger ring, and semi-offset describes a smaller stagger.Read more in the glossary
- Offset
- Edge
- Thinning blade with grooved tooth tips
- Teeth
- 40
- Steel
- Supreme Stainless Alloy
- SKU
- JOE-JOEWELL-THIN-SNT40
Specs shown are for the option you picked. Our listing walkthrough shows what can change between options and how to check each tool in a set.
SNT-40 gives the tooth tips a different job
SNT-40 is a 40-tooth volume-control thinner at a nominal 5.9 inches. The right-handed tool has small grooves at the tooth tips, Supreme Stainless Alloy and a dry-bearing screw system. Its listed handle layout is offset.
Joewell’s official 2024 catalogue, on the SNT page, identifies 40 teeth and 5.9 inches with a cut ratio below 5%. The current Japanese model page also identifies the SNT-40 at 5.9 inches. Keep the exact model statement with the tool when comparing specifications.
Forty teeth can describe very different thinners
The E-40 also has 40 teeth, but Joewell gives it a 35% statement. It is a 5.6-inch symmetric-handle model with a flat screw. The six-inch FX-PRO 40 changes the blade and grip again.
Those examples show why the count cannot identify the cut-rate statement or finish the selection. The same-count guide keeps nominal size, tooth description, handle and pivot in view. The ratio guide explains what a maker’s figure leaves open on an actual section.
Look closely, then agree the placement
A small tip groove is a construction feature. It does not, on its own, establish a suitable placement or guarantee a damage-free result. Our tooth anatomy guide helps identify that feature without turning a close-up into a cutting instruction.
If you are learning where a volume-control tool belongs, use the supervised comparison brief with your educator. They set the work and sequence; record the selected model and observed change before deciding what it adds to your kit.
Clear hair from the teeth, keep the blades dry and protect them in storage. Follow the exact dry-bearing instructions rather than borrowing an E-series flat-screw routine. A changed action belongs in the care and symptom guide.
Shipping
Standard shipping is A$6, and free on orders over A$89, so any order with a pair of scissors ships free. Express is A$9.95. Online checkout delivers within Australia.
View full shipping policy →Returns
Change of mind: contact us within 14 days of delivery. The item must be unused, undamaged and complete in its original packaging. You pay return postage, the original delivery charge is not refunded, and a 10% restocking fee applies. Used items and opened razor blades are excluded. Faults are covered by the Australian Consumer Law.
View full returns policy →Browse related
More Joewell thinning shears
All Joewell →
- −25% off
Joewell Scissors
Joewell E30 Hairdressing Thinning Scissors
Hair Thinning Scissors
$599.00 Was $799.00
- −33% off
Joewell Scissors
Joewell E-40 Hairdressing Thinning Scissors
Hair Thinning Scissors
$599.00 Was $899.00
The journal
Understand the fit, look after the tool
Guides to help you compare the selected model and plan its care.


